Cold Plate Chiller systems page 446 Accessories for climate control page 471 Liquid-cooled partial mounting Design: Accessories: − System attachment plate with drilling surface − Press-fitted copper or stainless − Quick-action vent valve, 8616.700, see page 444 and T channel steel tubes, dependent on the see page 444 Whole surface can be used by application, in closed − Accessories for fluid distributor Detailed drawings: the customer for own tapped recooling systems or existing connection, see page 444 Available at www.rittal-corp.com holes (blind holes) to a maximum (open) water infrastructure.− − TS punched section with drilling depth of 0.5" (12 mm). Cooling water connection: mounting flange 0.7" x 2.9" Alternatively, drive units may be G¼˝, anti-twist (17 x 73 mm) secured to the T channel for the outer mounting level, depending on the version. Configuration: see page 651 Mounting accessories for − Chiller systems for closed system integration into TS 8 cooling circuits, see from page 445 Cold Plate including T channel for frequency converters Part No. 8616.602 8616.622 8616.802 8616.822 Enclosure width inches (mm) 24 (600) 24 (600) 32 (800) 32 (800) For installation in Enclosure depth (side) inches (mm) 24 (600) 24 (600) 32 (800) 32 (800) 16 x 20 x 1 16 x 20 x 1 16 x 28 x 1 16 x 28 x 1 Dimensions inches (mm) H x W x D inches (mm) (399 x 499 x 20) (399 x 499 x 20) (399 x 699 x 1) (399 x 699 x 1) Output1) BTU (W) 8538 (2500) 8538 (2500) 10246 (3000) 10246 (3000) Material CU VA CU VA Packs of 1 1 1 1 1) At 77°F (25°C) medium inlet temperature, Cold Plate surface temperature ≈ 122°F (50°C), medium flowrate Q = 53 g/h (200 l/h), surface roughness: 1.2 μm. Special sizes available on request. Rittal Catalog 33/Climate control Metric measurements for are exact, imperial measurements are rounded 443
rittal
To see the actual publication please follow the link above