Climate control accessories Air routing Shallow air duct system For Packs of Part No. for roof-mounted cooling units and air/water heat exchangers, to fit TS 8 enclosures from 3209. . . ./3210. . . . a width of 32” (800 mm) and a depth of 3273. . . ./3383. . . . 1 3286.850 24” (600 mm). 3384. . . ./3385. . . . It is possible to route the cold air directly to specific areas of the enclosure using the air duct system. The risk of “short circuits” in the air circulation due to self-ventilated installed devices is therefore eliminated. The dimensions of the shallow duct are 59 x 9 x 1 inches H x W x D (1500 x 229 x 9 mm), and can be shortened to the required length. Material: Flame-resistant plastic to DIN 4102/B1 Configuration: − Shallow duct − Adaptor − Compensating piece − Deflector, 90° Note: Do not direct cold air straight at active components. When using the ducting system, the performance of the cooling unit may be reduced, depending on the application in question. Also required: − Shallow duct extension 3286.860 to compensate for the enclosure width and height − TS support strips, see page 656 Accessories: − Deflector 90°, see page 471 − Stopper, see page 478 Shallow duct extension Packs of Part No Extension kit for shallow air duct system 1 3286.860 3286.850 for width, depth or height length extensions in TS 8 enclosures. Material: Flame-resistant plastic to DIN 4102/B1 Configuration: − Shallow duct 59” (1500 mm) − Connecting piece 472 Metric measurements for are exact, imperial measurements are rounded Rittal Catalog 33/Climate control
rittal
To see the actual publication please follow the link above