Base Base Width divider Packs of Part No. Divides 47” (1200 mm) wide TS enclosures into 1 set 8800.200 two halves. Also required: Material: Depending on the installation situation: Carbon steel − TS punched rail 0.7” x 1.5” (18 x 38 mm), see page 655 Surface finish: − PS punched section without mounting flange, Zinc-plated 0.9” x 2.9” (23 x 73 mm), see page 658 Configuration: 1 set = 1 bracket for right/left, 2 compensating plates for the top, mounting accessories. 1. Mounting position: Also required: Two mounting plates side by side. In accordance with the enclosure depth: Two mounting plates (from 24” (600 mm) wide − 4 TS punched rails 0.7” x 1.5” (18 x 38 mm), enclosures) in a 47” (1200 mm) wide enclosure bottom, see page 665 permit independent positioning and easy − 1 PS punched section without mounting flange handling. 0.9” x 2.9” (23 x 73 mm), top, see page 658 2. Mounting position: Also required: System support rails, fitted on the left. − 2 system support rails 4361.000, When heavy installed equipment rests on the see page 660 system support rails, the remaining floor space − 1 TS punched rail 0.7” x 1.5” (18 x 38 mm) is free, e.g. for unhindered cable entry. in accordance with the enclosure depth (included with the supply of the standard enclosure) 3. Mounting position: Also required: Cable clamp rail, installed on the left. − 1 cable clamp rail 4191.000, see page 723 With 47” (1200 mm) wide enclosures, the width − 1 TS punched rail 0.7” x 1.5” (18 x 38 mm) divider allows cable entry and cable clamping to in accordance with the enclosure depth be arranged differently on the left and right of the (included with the supply of the standard enclosure. enclosure) 552 Metric measurements for are exact, imperial measurements are rounded Rittal Catalog 33/System accessories
rittal
To see the actual publication please follow the link above