Interior installation Rail systems TS punched section with For the outer mounting level mounting flange, 17 x 73 mm For enc. width/depth Packs Part No. Variable, with 5 rows of holes for universal inches (mm) of skeleton structures or partial assembly. Simply 12 (300) 4 8612.130 locate into the TS punchings and secure. 16 (400) 4 8612.140 Installation options: 20 (500) 4 8612.150 – On the vertical TS enclosure section 24 (600) 4 8612.160 − On the outer mounting level, all-round, at the same height 32 (800) 4 8612.180 − On the inner mounting level, all-round, 39 (1000) 4 8612.100 height-offset 47 (1200) 4 8612.120 – In CM and TP via rail for interior installation − In the depth, for outer mounting level − In the width, for inner mounting level For the inner mounting level For enc. width/depth Packs Material: inches (mm) of Part No. Carbon steel 12 (300) 4 8612.030 Surface finish: 16 (400) 4 8612.040 Zinc-plated 20 (500) 4 8612.050 Configuration: 24 (600) 4 8612.060 Assembly screws 32 (800) 4 8612.080 36 (900) 4 8612.090 Also required: For installation in CM, TP: 39 (1000) 4 8612.000 Rail for interior installation, see page 651 47 (1200) 4 8612.020 Accessories: − Screws, see page 674 − Cable tie for fast assembly 2597.000, see page 726 Configuration examples: From page 644 Attachment TS Packs of Part No. for TS punched section with mounting flange, 12 8612.010 17 x 73 mm Benefits: – For attaching the TS punched section with mounting flange where access to installed equipment, such as mounting panels, is blocked by the screw fastening – May also be screw-fastened onto the punched section with mounting flange or enclosure frame and used as a support for contact hazard protection covers or master switch trim panels Material: Carbon steel Surface finish: Zinc-plated 652 Metric measurements for are exact, imperial measurements are rounded Rittal Catalog 33/System accessories
rittal
To see the actual publication please follow the link above