Interior installation Rail systems TS punched sections without For enc. mounting flange, 45 x 88 mm inches (mm) Packs of Part No.width/depth Heavy top-mounted equipment mounted directly on the internal surfaces (e.g. roof) is supported. 20 (500) 2 8612.650 Mounted on the side or rear, the enclosure can 24 (600) 2 8612.660 then be screw-fastened securely to the machine. 32 (800) 2 8612.680 The twin profile with 11 rows of holes offers numerous additional opportunities for interior installation. Installation options: – On the vertical and horizontal TS enclosure section Material: Carbon steel Surface finish: Zinc-plated Configuration: Assembly parts Accessories: − Screws, see page 674 − Threaded blocks, captive nuts, see page 673 Configuration examples: See page 648 TS punched rail 25 x 38 mm For enc. For heavy installations, with attachment holes. width/depth Packs of Part No. inches (mm) Installation options: 20 (500) 2 8612.750 – On the vertical TS enclosure section 24 (600) 2 8612.760 With 9 mm round holes on a 25 mm pitch pattern 32 (800) 2 8612.780 on all sides, for mounting: – Support rails, see page 661 – System support rails, see page 660 – C rails 30/15, see page 659 – Cable clamp rails (right angle section), see page 723 – Own assemblies Material: Carbon steel, 11 ga (3.0 mm) Surface finish: Zinc-plated Configuration: Assembly screws Also required: Snap-on nut M8, 8800.808, see page 666 Note: In conjunction with the snap-on nut, particularly well-suited for dynamic connections. Configuration examples: See page 648 654 Metric measurements for are exact, imperial measurements are rounded Rittal Catalog 33/System accessories
rittal
To see the actual publication please follow the link above