19” (482.6 mm) installation system Mounting angles/mounting kits for mounting angles TS punched section For enclosures with mounting flange Width Depth Packs Part No.of as installation kit inches (mm) inches (mm) for 24 (600) 24 (600) 4 8612.060 – Mounting angles, 19” (482.6 mm) 24 (600) 32 (800) 4 8612.080 – Mounting angles, metric, 24 (600) 39 (1000) 4 8612.000 mounting dimension 18" (465 mm) 24 (600) 47 (1200) 4 8612.020 Installation in enclosure width 600 mm The installation kit consists of 4 TS punched sections with mounting flange 17 x 73 mm to accommodate mounting angles. One pack is sufficient for installing one or two 19” (482.6 mm) mounting levels. For exceptionally heavy installed equipment, we recommend the installation of additional punched sections in the center. Material: Carbon steel Surface finish: Zinc-plated Configuration: Assembly parts Installation bracket TS Installation Packs of Part No. for mounting angles into TS, 19” (482.6 mm) position central 2 7827.480 Installation in enclosure width 32” (800 mm) Depth stays are screw-fastened to the enclosure side 2 7827.490 frame in the enclosure width. The mounting angle is attached to the depth stay at the top and bottom. The bracket ensures optimum clearance at the sides for cable routing. For partial enclosure configuration, the depth stays may be attached to the TS punched sections with mounting flanges 17 x 73 mm on the outer attachment level of the enclosure frame. Fully depth variable attachment is facilitated by the attachment slots. Either cranked or L-shaped mounting angles may be used. Material: Carbon steel Surface finish: Zinc-plated Configuration: Assembly parts Accessories: For partial installation, − TS punched section with mounting flange, 17 x 73 mm, see page 652 − Mounting angles, cranked or L-shaped, see page 751 758 Metric measurements for are exact, imperial measurements are rounded Rittal Catalog 33/System accessories
rittal
To see the actual publication please follow the link above