19” (482.6 mm) installation system 19” (482.6 mm) installation Brush strip, vertical For enc. height Packs of Part No. for TS inches (mm) Serves as a flexible infill panel which conceals 79 (2000) 1 set 7827.544 the cable management area to the side of the 19” (482.6 mm) mounting level. The brush strip allows Material: cable routing from the side and rear distributor Aluminum section with brush strip: area to the front connection level. The clearance Plastic, UL 94-V0 required in front of the mounting level is at least 3” (75 mm). Within the TS, the brush strip is Configuration: mounted at the side on the vertical frame section, 1 set = 4 brush strips, length 37” (950 mm) each on horizontal or vertical punched sections. There is an additional mounting option directly on the installation level of the TS. For direct attachment to the 19” (482.6 mm) mounting frame of the TS, the brush strip must be cut to length accordingly. Air brush baffle Height x Width Part No. Designed to block air and redirect it where inches (mm) needed. Designed to mount to the z-rail on the 80 x 24 (2000 x 600) 9961.328 top, bottom, and both sides. 80 x 28 (2000 x 700) 9961.329 – Easy installation 80 x 32 (2000 x 800) 9961.330 – Available for 79” (2000) and 87” (2200) 88 x 24 (2200 x 600) 9961.331 server cabinets 88 x 28 (2200 x 700) 9961.332 – Standard in LCP ready cabinet 88 x 32 (2200 x 800) 9961.333 Note: Metal trim is black. Metal air baffle Height x Width Part No. Designed to block air between the frame and rails inches (mm) and redirect it where needed. Designed to mount 80 x 24 (2000 x 600) 9978.352 to frame. 80 x 28 (2000 x 700) 9978.353 – Easy installation 80 x 32 (2000 x 800) 9978.354 – Available for 79” (2000) and 87” (2200) 88 x 24 (2200 x 600) 9978.355 server cabinets 88 x 28 (2200 x 700) 9978.356 – Economical solution 88 x 32 (2200 x 800) 9978.357 Mounting panel Panel Panel width 19” (482.6 mm) height inches (mm) Packs of Part No. For fast integration of smaller mounting units U within the 19” (482.6 mm) level, such as potential 2 18 (450) 1 7151.300 equalization rails, distributor boxes, small electrical components etc. Simple screw- fastening of the components to the integral 25 mm system punchings. Material: Carbon steel Surface finish: Zinc-plated Configuration: Assembly parts 770 Metric measurements for are exact, imperial measurements are rounded Rittal Catalog 33/System accessories
rittal
To see the actual publication please follow the link above